Prosthetics > S-line Platform 2.0mm
Standard Ball Attachment Ø4.2mm
Height: 0.5mm
Ref.: AGM-105-0.5
Ref.: AGM-105-0.5
Material: Titanium
Recommended torque 25Ncm using hand driver 1.25MM .
Recommended torque 25Ncm using hand driver 1.25MM .
Standard Ball Attachment Ø4.2mm
Height: 1mm
Ref.: AGM-105-1
Ref.: AGM-105-1
Material: Titanium
Recommended torque 25Ncm using hand driver 1.25MM .
Recommended torque 25Ncm using hand driver 1.25MM .
Standard Ball Attachment Ø4.2mm
Height: 2mm
Ref.: AGM-105-2
Ref.: AGM-105-2
Material: Titanium
Recommended torque 25Ncm using hand driver 1.25MM .
Recommended torque 25Ncm using hand driver 1.25MM .
Standard Ball Attachment Ø4.2mm
Height: 3mm
Ref.: AGM-105-3
Ref.: AGM-105-3
Material: Titanium
Recommended torque 25Ncm using hand driver 1.25MM .
Recommended torque 25Ncm using hand driver 1.25MM .
Impression Transfers for Open Tray Impression
Height: 14mm
Ref.: AGM-301-SL
Ref.: AGM-301-SL
Material: Stainless Steel
Recommended torque - manual only light finger tight (5-10Ncm) using hand driver 1.25MM .
Recommended torque - manual only light finger tight (5-10Ncm) using hand driver 1.25MM .
Impression Transfers for closed tray impression click connection
Height: 9mm
Ref.: AGM-302-SL
Ref.: AGM-302-SL
Material: Stainless Steel
Recommended torque - manual only light finger tight (5-10Ncm) using hand driver 1.25MM .
Recommended torque - manual only light finger tight (5-10Ncm) using hand driver 1.25MM .
Impression Transfers for closed tray impression screw connection
Height: 11mm
Ref.: AGM-303-SL
Ref.: AGM-303-SL
Material: Stainless Steel
Recommended torque - manual only light finger tight (5-10Ncm) using hand driver 1.25MM .
Recommended torque - manual only light finger tight (5-10Ncm) using hand driver 1.25MM .
Implant Analog with Internal Hex 2.0mm
Height: 3mm
Ref.: AGM-105-3
Ref.: AGM-105-3
Material: Titanium
Recommended torque 25Ncm using hand driver 1.25MM .
Recommended torque 25Ncm using hand driver 1.25MM .
Abutments Straight
Height: 10mm
Ref.: AGM-100-S
Ref.: AGM-100-S
Material: Titanium
Recommended torque - 20Ncm
Recommended torque - 20Ncm
15° Abutments Angulated
Height: 11mm
Ref.: AGM-115-S
Ref.: AGM-115-S
Material: Titanium
Recommended torque - 20Ncm
Recommended torque - 20Ncm
Abutments Shoulder 1mm
Height: 10mm
Ref.: AGM-602-1S
Ref.: AGM-602-1S
Material: Titanium
Recommended torque - manual only light finger tight (5-10Ncm) using hand driver 1.25MM .
Recommended torque - manual only light finger tight (5-10Ncm) using hand driver 1.25MM .
Abutments Shoulder 2mm
Height: 10mm
Ref.: AGM-602-2S
Ref.: AGM-602-2S
Material: Titanium
Recommended torque - manual only light finger tight (5-10Ncm) using hand driver 1.25MM .
Recommended torque - manual only light finger tight (5-10Ncm) using hand driver 1.25MM .
Abutments Shoulder 3mm
Height: 10mm
Ref.: AGM-602-3S
Ref.: AGM-602-3S
Material: Titanium
Recommended torque - manual only light finger tight (5-10Ncm) using hand driver 1.25MM .
Recommended torque - manual only light finger tight (5-10Ncm) using hand driver 1.25MM .
Direct Prosthetic S-line Screw
Height: 7.7mm
Ref.: AGM-202S
Ref.: AGM-202S
Material: Titanium
Recommended torque - 20Ncm
Recommended torque - 20Ncm
Temporary Abutments for Casting Hex
Height: 10mm
Ref.: AGM-903-SL
Ref.: AGM-903-SL
Material: REEK
Recommended torque - 15Ncm. Supplied with prosthetic screw
Recommended torque - 15Ncm. Supplied with prosthetic screw
Temporary Abutments for Casting Non-Hex
Height: 10mm
Ref.: AGM-904-SL
Ref.: AGM-904-SL
Material: REEK
Recommended torque - 15Ncm. Supplied with prosthetic screw
Recommended torque - 15Ncm. Supplied with prosthetic screw
Plastic Abutments for Casting Height 11mm Hex
Ref.: AGM-P6
Material: Plastic
Recommended torque -20 Ncm/ Supplied with prosthetic screw
Recommended torque -20 Ncm/ Supplied with prosthetic screw
Plastic Abutments for Casting Height 11mm Non-Hex
Ref.: AGM-P5
Material: Plastic
Recommended torque -20 Ncm/ Supplied with prosthetic screw
Recommended torque -20 Ncm/ Supplied with prosthetic screw
Low Profile Connector Ø4.6mm
Height: 2mm
Ref.: AGM-207-2FS
Ref.: AGM-207-2FS
Material: Titanium
Recommended torque - 20Ncm. Using hex driver 1.25mm. Low profile abutment used for multiple unit screw retained restorations.
Recommended torque - 20Ncm. Using hex driver 1.25mm. Low profile abutment used for multiple unit screw retained restorations.
Low Profile Connector Ø4.6mm
Height: 3mm
Ref.: AGM-207-3FS
Ref.: AGM-207-3FS
Material: Titanium
Recommended torque - 20Ncm. Using hex driver 1.25mm. Low profile abutment used for multiple unit screw retained restorations.
Recommended torque - 20Ncm. Using hex driver 1.25mm. Low profile abutment used for multiple unit screw retained restorations.
Low Profile Connector Ø4.6mm
Height: 4mm
Ref.: AGM-207-4FS
Ref.: AGM-207-4FS
Material: Titanium
Recommended torque - 20Ncm. Using hex driver 1.25mm. Low profile abutment used for multiple unit screw retained restorations.
Recommended torque - 20Ncm. Using hex driver 1.25mm. Low profile abutment used for multiple unit screw retained restorations.
Low Profile Connector Ø4.6mm
Height: 5mm
Ref.: AGM-207-5FS
Ref.: AGM-207-5FS
Material: Titanium
Recommended torque - 20Ncm. Using hex driver 1.25mm. Low profile abutment used for multiple unit screw retained restorations.
Recommended torque - 20Ncm. Using hex driver 1.25mm. Low profile abutment used for multiple unit screw retained restorations.
Straight Multi-Unit Ø5.0mm
Height: 1mm
Ref.: AGM-700-1S
Ref.: AGM-700-1S
Material: Titanium
Recommended torque - 20Ncm. Using hex driver 1.25mm.
Recommended torque - 20Ncm. Using hex driver 1.25mm.
Straight Multi-Unit Ø5.0mm
Height: 2mm
Ref.: AGM-700-2S
Ref.: AGM-700-2S
Material: Titanium
Recommended torque - 20Ncm. Using hex driver 1.25mm.
Recommended torque - 20Ncm. Using hex driver 1.25mm.
Straight Multi-Unit Ø5.0mm
Height: 3mm
Ref.: AGM-700-3S
Ref.: AGM-700-3S
Material: Titanium
Recommended torque - 20Ncm. Using hex driver 1.25mm.
Recommended torque - 20Ncm. Using hex driver 1.25mm.
Straight Multi-Unit Ø5.0mm
Height: 4mm
Ref.: AGM-700-4S
Ref.: AGM-700-4S
Material: Titanium
Recommended torque - 20Ncm. Using hex driver 1.25mm.
Recommended torque - 20Ncm. Using hex driver 1.25mm.
Straight Multi-Unit Ø5.0mm
Height: 5mm
Ref.: AGM-700-5S
Ref.: AGM-700-5S
Material: Titanium
Recommended torque - 20Ncm. Using hex driver 1.25mm.
Recommended torque - 20Ncm. Using hex driver 1.25mm.
15° Angulated Multi-Unit
Height: 2mm
Ref.: AGM-700-2S
Ref.: AGM-700-2S
Material: Titanium
Recommended torque - 20Ncm. Using hex driver 1.25mm.
Recommended torque - 20Ncm. Using hex driver 1.25mm.
Ball Attachment Ø3.7mm
Height: 1mm
Ref.: AGM-105-1S
Ref.: AGM-105-1S
Material: Titanium
Recommended torque 20Ncm. Using hex driver 1.25MM .
Recommended torque 20Ncm. Using hex driver 1.25MM .
Ball Attachment Ø3.7mm
Height: 2mm
Ref.: AGM-105-2S
Ref.: AGM-105-2S
Material: Titanium
Recommended torque 20Ncm. Using hex driver 1.25MM .
Recommended torque 20Ncm. Using hex driver 1.25MM .
Ball Attachment Ø3.7mm
Height: 3mm
Ref.: AGM-105-3S
Ref.: AGM-105-3S
Material: Titanium
Recommended torque 20Ncm. Using hex driver 1.25MM .
Recommended torque 20Ncm. Using hex driver 1.25MM .
Ball Attachment Ø3.7mm
Height: 4mm
Ref.: AGM-105-4S
Ref.: AGM-105-4S
Material: Titanium
Recommended torque 20Ncm. Using hex driver 1.25MM .
Recommended torque 20Ncm. Using hex driver 1.25MM .
Ball Attachment Ø3.7mm
Height: 5mm
Ref.: AGM-105-5S
Ref.: AGM-105-5S
Material: Titanium
Recommended torque 20Ncm. Using hex driver 1.25MM .
Recommended torque 20Ncm. Using hex driver 1.25MM .
Alfa-Lock Attachment Ø4.5mm
Height: 1mm
Ref.: AGM-106-1S
Ref.: AGM-106-1S
Material: Titanium
Recommended torque 20Ncm. Using hex driver 1.25MM .
Recommended torque 20Ncm. Using hex driver 1.25MM .
Alfa-Lock Attachment Ø4.5mm
Height: 2mm
Ref.: AGM-106-2S
Ref.: AGM-106-2S
Material: Titanium
Recommended torque 20Ncm. Using hex driver 1.25MM .
Recommended torque 20Ncm. Using hex driver 1.25MM .
Alfa-Lock Attachment Ø4.5mm
Height: 3mm
Ref.: AGM-106-3S
Ref.: AGM-106-3S
Material: Titanium
Recommended torque 20Ncm. Using hex driver 1.25MM .
Recommended torque 20Ncm. Using hex driver 1.25MM .
Alfa-Lock Attachment Ø4.5mm
Height: 4mm
Ref.: AGM-106-4S
Ref.: AGM-106-4S
Material: Titanium
Recommended torque 20Ncm. Using hex driver 1.25MM .
Recommended torque 20Ncm. Using hex driver 1.25MM .
Alfa-Lock Attachment Ø4.5mm
Height: 5mm
Ref.: AGM-106-5S
Ref.: AGM-106-5S
Material: Titanium
Recommended torque 20Ncm. Using hex driver 1.25MM .
Recommended torque 20Ncm. Using hex driver 1.25MM .