UCLA Abutments for Casting
Height: 16mm
Ref.: UCLA
Ref.: UCLA
UCLA Abutments for Casting
Material: CoCr/ Plastic
Recommended torque is 25Ncm.
Material: CoCr/ Plastic
Recommended torque is 25Ncm.
Plastic Abutments for Casting Hex wide profile
Height: 11mm
Ref.: AGM-P1
Ref.: AGM-P1
The Plastic Abutments for Casting are for internal hex implants 2.42 mm.
internal hex implants.
Material: Plastic
Recommended torque is 25Ncm.
internal hex implants.
Material: Plastic
Recommended torque is 25Ncm.
Plastic Abutments for Casting Hex sleeve
Height: 11mm
Ref.: AGM-P3
Ref.: AGM-P3
The Plastic Abutments for Casting are for internal hex implants 2.42 mm.
internal hex implants.
Material: Plastic
Recommended torque is 25Ncm.
internal hex implants.
Material: Plastic
Recommended torque is 25Ncm.
Plastic Abutments for Casting Non-Hex sleeve
Height: 11mm
Ref.: AGM-P4
Ref.: AGM-P4
The Plastic Abutments for Casting are for internal hex implants 2.42 mm.
internal hex implants.
Material: Plastic
Recommended torque is 25Ncm.
internal hex implants.
Material: Plastic
Recommended torque is 25Ncm.
Screw Retained Temporary Abutments Long –2pcs
Height: 15mm
Ref.: AGM-900
Ref.: AGM-900
Screw Retained Temporary Abutments are made of titanium for internal hex implants 2.42 mm.
Material: Titanium
Recommended torque is 25Ncm.
Material: Titanium
Recommended torque is 25Ncm.
Screw Retained Temporary Abutments with hex 10mm
Height: 10mm
Ref.: AGM-901
Ref.: AGM-901
Screw Retained Temporary Abutments are made of titanium for internal hex implants 2.42 mm.
Material: Titanium
Recommended torque is 25Ncm.
Material: Titanium
Recommended torque is 25Ncm.
Screw Retained Temporary Abutments with Non-hex 10mm
Height: 10mm
Ref.: AGM-902
Ref.: AGM-902
Screw Retained Temporary Abutments are made of titanium for internal hex implants 2.42 mm.
Material: Titanium
Recommended torque is 25Ncm.
Material: Titanium
Recommended torque is 25Ncm.
Temporary Abutments Hex
Height: 10mm
Ref.: AGM- 903
Ref.: AGM- 903
Material: Peek
Supplied with prosthetic
screw AGM- 202
Recommended torque is 20Ncm.
Temporary Abutments Non-Hex
Height: 10mm
Ref.: AGM-904
Ref.: AGM-904
Material: Peek
Supplied with prosthetic
screw AGM- 202
Recommended torque is 20Ncm.
Single Unit Ø4.6mm
Height: 1mm
Ref.: AGM-207-1H
Ref.: AGM-207-1H
Anti rotation anatomic connector used for single unit screw ratained restorations.
Recommended torque is 25Ncm.
Material: Titanium
Recommended torque is 25Ncm.
Material: Titanium
Single Unit Ø4.6mm
Height: 2mm
Ref.: AGM-207-2H
Ref.: AGM-207-2H
Anti rotation anatomic connector used for single unit screw ratained restorations.
Recommended torque is 25Ncm.
Material: Titanium
Recommended torque is 25Ncm.
Material: Titanium
Single Unit Ø4.6mm
Height: 3mm
Ref.: AGM-207-3H
Ref.: AGM-207-3H
Anti rotation anatomic connector used for single unit screw ratained restorations.
Recommended torque is 25Ncm.
Material: Titanium
Recommended torque is 25Ncm.
Material: Titanium
Single unit Abutments
Transfer Open Tray
Height: 22mm
Ref.: AGM-301-H
Ref.: AGM-301-H
Angulated Single-Unit Prosthetics are for internal hex implants 2.42 mm.
Material: Stainless Steel
Recommended torque - manual only light finger tight (5-10Ncm) using hand driver 1.25mm
Material: Stainless Steel
Recommended torque - manual only light finger tight (5-10Ncm) using hand driver 1.25mm
Single Unit Analog
Height: 12mm
Ref.: AGM-214- H
Ref.: AGM-214- H
Angulated Single-Unit Prosthetics are for internal hex implants 2.42 mm.
Material: Stainless Steel/ Titanium
Recommended torque - manual only light finger tight (5-10Ncm) using hand driver 1.25mm
Material: Stainless Steel/ Titanium
Recommended torque - manual only light finger tight (5-10Ncm) using hand driver 1.25mm
Single Unit Healing Cap
Height: 3mm
Ref.: AGM-509-H
Ref.: AGM-509-H
Angulated Single-Unit Prosthetics are for internal hex implants 2.42 mm.
Material: Stainless Steel/ Titanium
Recommended torque - manual only light finger tight (5-10Ncm) using hand driver 1.25mm
Material: Stainless Steel/ Titanium
Recommended torque - manual only light finger tight (5-10Ncm) using hand driver 1.25mm
Single Unit Abutments
Screw- 2ps
Height: 4mm
Ref.: AGM-207-SCH
Ref.: AGM-207-SCH
Recommended torque - 20Ncm.
Using hex driver 1.25MM
Material: Titanium
Using hex driver 1.25MM
Material: Titanium
Single Unit Abutments Plastic
Height: 12mm
Ref.: AGM-207-PH
Ref.: AGM-207-PH
Recommended torque - 20Ncm.
Using hex driver 1.25MM
Material: Plastic
Using hex driver 1.25MM
Material: Plastic
Single Unit Abutments Temporary
Height: 12mm
Ref.: AGM-207-PK
Ref.: AGM-207-PK
Recommended torque - 20Ncm.
Using hex driver 1.25MM
Material: Peek
Using hex driver 1.25MM
Material: Peek
Low Profile Connector Ø4.6mm
Height: 1mm
Ref.: AGM-207-1F
Ref.: AGM-207-1F
Anti rotation anatomic connectoruseg for single unit screw retained restorations.
Material: Titanium
Recommended torque - 25 Ncm.
Material: Titanium
Recommended torque - 25 Ncm.
Low Profile Connector Ø4.6mm
Height: 2mm
Ref.: AGM-207-2F
Ref.: AGM-207-2F
Anti rotation anatomic connectoruseg for single unit screw retained restorations.
Material: Titanium
Recommended torque - 25 Ncm.
Material: Titanium
Recommended torque - 25 Ncm.
Low Profile Connector Ø4.6mm
Height: 3mm
Ref.: AGM-207-3F
Ref.: AGM-207-3F
Anti rotation anatomic connectoruseg for single unit screw retained restorations.
Material: Titanium
Recommended torque - 25 Ncm.
Material: Titanium
Recommended torque - 25 Ncm.
Low Profile Connector Ø4.6mm
Height: 4mm
Ref.: AGM-207-4F
Ref.: AGM-207-4F
Anti rotation anatomic connectoruseg for single unit screw retained restorations.
Material: Titanium
Recommended torque - 25 Ncm.
Material: Titanium
Recommended torque - 25 Ncm.
Low Profile Connector Ø4.6mm
Height: 5mm
Ref.: AGM-207-5F
Ref.: AGM-207-5F
Anti rotation anatomic connectoruseg for single unit screw retained restorations.
Material: Titanium
Recommended torque - 25 Ncm.
Material: Titanium
Recommended torque - 25 Ncm.
Low Profile Connector Ø4.6mm
Height: 6mm
Ref.: AGM-207-6F
Ref.: AGM-207-6F
Anti rotation anatomic connectoruseg for single unit screw retained restorations.
Material: Titanium
Recommended torque - 25 Ncm.
Material: Titanium
Recommended torque - 25 Ncm.
Low Profile Connector Transfer Open Tray
Height: 22mm
Ref.: AGM-301-F
Ref.: AGM-301-F
Material: Stainless Steel/ Titanium
Recommended torque - manual only light finger tight (5-10Ncm) using hand driver 1.25mm
Low Profile Connector Prosthetics Analog
Height: 12mm
Ref.: AGM-214-F
Ref.: AGM-214-F
Material: Stainless Steel/ Titanium
Recommended torque - manual only light finger tight (5-10Ncm) using hand driver 1.25mm
Low Profile Connector Prosthetics Healing Cap
Height: 3mm
Ref.: AGM-509-F
Ref.: AGM-509-F
Material: Stainless Steel/ Titanium
Recommended torque - manual only light finger tight (5-10Ncm) using hand driver 1.25mm
Low Profile Connector Cylinder screw - 2pcs
Height: 4mm
Ref.: AGM-207-SCF
Ref.: AGM-207-SCF
Anti rotation anatomic connectoruseg for single unit screw retained restorations.
Material: Titanium
Recommended torque - 25 Ncm.
Material: Titanium
Recommended torque - 25 Ncm.
Low Profile Connector Prosthetics Titanium temporary cylinder
Height: 10mm
Ref.: AGM-207-tF
Ref.: AGM-207-tF
Material: Titanium
Using hex driver 1.25MM
Recommended torque - 20Ncm.
Using hex driver 1.25MM
Recommended torque - 20Ncm.
Low Profile Connector Prosthetics Plastic cylinder
Height: 12mm
Ref.: AGM-207-PF
Ref.: AGM-207-PF
Material: Plastic
Using hex driver 1.25MM
Recommended torque - 20Ncm.
Using hex driver 1.25MM
Recommended torque - 20Ncm.
Straight Multi-Unit Ø5.0mm
Height: 1mm
Ref.: AGM-700-1
Ref.: AGM-700-1
Material: Titanium
Using hex driver 1.25MM
Recommended torque - 25Ncm.
Using hex driver 1.25MM
Recommended torque - 25Ncm.
Straight Multi-Unit Ø5.0mm
Height: 2mm
Ref.: AGM-700-2
Ref.: AGM-700-2
Material: Titanium
Using hex driver 1.25MM
Recommended torque - 25Ncm.
Using hex driver 1.25MM
Recommended torque - 25Ncm.
Straight Multi-Unit Ø5.0mm
Height: 3mm
Ref.: AGM-700-3
Ref.: AGM-700-3
Material: Titanium
Using hex driver 1.25MM
Recommended torque - 25Ncm.
Using hex driver 1.25MM
Recommended torque - 25Ncm.
Straight Multi-Unit Ø5.0mm
Height: 4mm
Ref.: AGM-700-4
Ref.: AGM-700-4
Material: Titanium
Using hex driver 1.25MM
Recommended torque - 25Ncm.
Using hex driver 1.25MM
Recommended torque - 25Ncm.
Straight Multi-Unit Ø5.0mm
Height: 4mm
Ref.: AGM-700-4
Ref.: AGM-700-4
Material: Titanium
Using hex driver 1.25MM
Recommended torque - 25Ncm.
Using hex driver 1.25MM
Recommended torque - 25Ncm.
17° Angulated Multi-Unit Ø5.0mm
Height: 1mm
Ref.: AGM-717-1
Ref.: AGM-717-1
Material: Titanium
Using hex driver 1.25MM
Recommended torque - 25Ncm.
Using hex driver 1.25MM
Recommended torque - 25Ncm.
17° Angulated Multi-Unit Ø5.0mm
Height: 2mm
Ref.: AGM-717-2
Ref.: AGM-717-2
Material: Titanium
Using hex driver 1.25MM
Recommended torque - 25Ncm.
Using hex driver 1.25MM
Recommended torque - 25Ncm.
17° Angulated Multi-Unit Ø5.0mm
Height: 3mm
Ref.: AGM-717-3
Ref.: AGM-717-3
Material: Titanium
Using hex driver 1.25MM
Recommended torque - 25Ncm.
Using hex driver 1.25MM
Recommended torque - 25Ncm.
30° Angulated Multi-Unit Ø5.0mm
Height: 1mm
Ref.: AGM-730-1
Ref.: AGM-730-1
Material: Titanium
Using hex driver 1.25MM
Recommended torque - 25Ncm.
Using hex driver 1.25MM
Recommended torque - 25Ncm.
30° Angulated Multi-Unit Ø5.0mm
Height: 2mm
Ref.: AGM-730-2
Ref.: AGM-730-2
Material: Titanium
Using hex driver 1.25MM
Recommended torque - 25Ncm.
Using hex driver 1.25MM
Recommended torque - 25Ncm.
30° Angulated Multi-Unit Ø5.0mm
Height: 3mm
Ref.: AGM-730-3
Ref.: AGM-730-3
Material: Titanium
Using hex driver 1.25MM
Recommended torque - 25Ncm.
Using hex driver 1.25MM
Recommended torque - 25Ncm.
45° Angulated Multi-Unit Ø5.0mm
Height: 3mm
Ref.: AGM-745-1
Ref.: AGM-745-1
Material: Titanium
Using hex driver 1.25MM
Recommended torque - 25Ncm.
Using hex driver 1.25MM
Recommended torque - 25Ncm.
Multi-Unit Prosthetics Transfer Open Tray
Height: 22mm
Ref.: AGM-508
Ref.: AGM-508
Material: Stainless Steel
Recommended torque - 5Ncm.Using hex driver 1.25MM
Recommended torque - 5Ncm.Using hex driver 1.25MM
Multi-Unit Prosthetics Analog
Height: 12mm
Ref.: AGM-507
Ref.: AGM-507
Material: Stainless Steel
Recommended torque - 5Ncm.Using hex driver 1.25MM
Recommended torque - 5Ncm.Using hex driver 1.25MM
Multi-Unit Prosthetics Healing Cap
Height: 5mm
Ref.: AGM-509
Ref.: AGM-509
Material: Titanium
Recommended torque - 5Ncm.Using hex driver 1.25MM
Recommended torque - 5Ncm.Using hex driver 1.25MM
Multi-Unit Prosthetics screw- 2pcs
Height: 4.5mm
Ref.: AGM-5096-SC
Ref.: AGM-5096-SC
Material: Titanium
Using hex driver 1.25MM
Recommended torque - manual only light finger tight (5-10Ncm) using hand driver 1.25MM .
Using hex driver 1.25MM
Recommended torque - manual only light finger tight (5-10Ncm) using hand driver 1.25MM .
Multi-Unit Prosthetics Temporary cylinder
Height: 12mm
Ref.: AGM-505
Ref.: AGM-505
Material: Titanium
Using hex driver 1.25MM
Recommended torque - manual only light finger tight (5-10Ncm) using hand driver 1.25MM .
Using hex driver 1.25MM
Recommended torque - manual only light finger tight (5-10Ncm) using hand driver 1.25MM .
Multi-Unit Prosthetics Plastic cylinder
Height: 4.5mm
Ref.: AGM-506
Ref.: AGM-506
Material: Plastic
Using hex driver 1.25MM
Recommended torque - manual only light finger tight (5-10Ncm) using hand driver 1.25MM .
Using hex driver 1.25MM
Recommended torque - manual only light finger tight (5-10Ncm) using hand driver 1.25MM .
Multi-Unit Prosthetics Temporary PEEK cylinder
Height: 4.5mm
Ref.: AGM-512
Ref.: AGM-512
Material: Peek
Using hex driver 1.25MM
Recommended torque - manual only light finger tight (5-10Ncm) using hand driver 1.25MM .
Using hex driver 1.25MM
Recommended torque - manual only light finger tight (5-10Ncm) using hand driver 1.25MM .
Multi-Unit Prosthetics screw- 2pcs
Height: 4.5mm
Ref.: AGM-5096-SC
Ref.: AGM-5096-SC
Material: Titanium
Using hex driver 1.25MM
Recommended torque - 25Ncm.
Using hex driver 1.25MM
Recommended torque - 25Ncm.